Shandong Nanhai Airbag Engineering Co.,Ltd
Nanhai Airbag > Products > Floating Pneumatic Fenders
Yokohama pneumatic fender marine fendering
Yokohama pneumatic fender marine fendering
Time:2012-2-24

Yokohama pneumatic fender marine fendering

Floating Pneumatic Fenders(Yokohama type pneuamtic fender)
with chain and truck tyre net or airplan tyre netting


All floating Net type pneumatic fenders comply with ISO17357:2002

 

Net type pneumatic fenders are fitted with a chain-tyre net.The net consists of used tyres connected by a network of horizontal and vertical chains,which adds further protection to the fender body.
The chains are galvanized for better corrosion resistance and covered by rubber sleeves to prevent abrasive damage to the outer rubber of fender body.

 

pneumatic  fender

 

As a leading anti-collision device, pneumatic rubber fenders have a long and successful history of protecting vessels in mooring operations. They are ideal for permanent and semi-permanent port applications, as well as for offshore ship-to-ship transfers. Our fenders are fast and easy to install, keeping suitable clearances between the hull and the jetty or vessels. Its aim is to minimize potential damage during berthing operations. These fenders play a critical role in the safe operation of ship berthing.

 

Relative Certificates:

 

Certificate and inspection report of pneumatic fender

 

Characteristics of pneumatic fenders:


1.Safety and Reliability
Using compressed air as damping medium,the rubber fender can transform flexibly under pressure,with large contact area,small reaction and absorb large amount of energy.
2.Safe for excess load
When berthing,the ship is almost at a certain angle,pneumatic rubber fender can realize touching in the angle by playing its full performance.

3.Adaptable to the tide
Floating on the water surface,even the ship fluctuate and sway resulting from ebb and flow of waves,the pneumatic rubber fender bears less friction,which would be no harm to coating surface of ship and  fender.
4.Simple installation
The weight of floating pneumatic fenders are supported by water on which it floats, therefore, the floating pneumatic fenders can be simply installed on the wharf and anchor mast.

 

Our Pneumatic Fenders

 

pneumatic fenderspneumatic rubber fender

yokohama fender

 

Major Strengths Of Our Pneumatic Fenders:

 


● High safety level: our pneumatic fenders can stand the maximum pressure up to 4 times that of the operating pressure.
● Easy maintenance: our fenders just need inflation once every six months.
● Low transportation cost: our fenders can be deflated and folded for transportation, thus saving about two thirds of the transportation cost.
● Long lifespan: it is guaranteed that our fenders can be used for over 10 years under normal conditions.

 

The structure of Pneumatic Fender


1. The outer rubber
Outside on the ball of rubber layer, which is used to protect by skeleton material and lining rubber ball from external force damage or wear.
2. Cord fabric reinforcement layer
Reinforcement layer is winded  by nylon cord layer and it maintains the inner pressure of fender.
3. The inner rubber
On the ball inside the rubber layer, which is used to prevent gas leakage and stay on the ball pressure.
4. The end of the flange
On the ball at the ends of the metal parts, can be installed charging valve and relief valve.

 

Application for  pneumatic fenders :


pneumatic fender has widespread application as following:
ship to ship,ship to wharf,
oil tankers, container vessels
luxury yachts, ocean platforms
large shipyards
Fender system
military ports ,warship 
large under water foundations of bridges engineering, etc
.

 ·Structure of pneumatic fender >>Read more

·Specifications performance and weight of Pneumatic fender>>Read more

·
Selection of pneumatic fender  >>Read more

·Installation of pneumatic fender  >>Read more

 

Sample of inspection report of pneumatic fender from third party


 

Contact us
Shandong Nanhai Airbag Engineering Co.,Ltd
Add:177 Industry Road No.1 Zhangqiu City,Jinan,Shandong Province,250200 China.
Tel:+86 531-58775198
Fax:+86 531-58775188
E-mail:info@airbag.cc
pneumatic fender